Due to the reactive nature of the VIVID™ concrete acid stain product line, no two concrete staining projects will ever be exactly alike. Depending on the chemical composition of the concrete substrate you're working and the amount of stain applied to the surface, so that even two similar substrates using the same color of VIVID™ can have vastly different outcomes in the natural variation that this type of staining method provides. While this type of decorative concrete product can be difficult to apply, we've made it as simple as possible - keeping labor costs down for professional applicators and still keeping it within the realm of ability for a homeowner to be able to apply our concrete acid stain in their home or patio area.
Available in 9 ready-to-use colors.
Areas where you might see VIVID Reactive Acid Stain:
Kitchen Floors
Bathroom and Basement Floors
Bathroom Countertops
Patios
School and Office Floors
Museum and Libraries
Commercial and Retail Flooring
Entertaining Areas
Themed Concrete Areas (IE – Theme Parks)
Hardscapes / Simulated Rock and Stone
Precast and Tilt-up Concrete
How Do You Apply VIVID Reactive Concrete Acid Stain?
Chemical stains can be tricky, but with a little direction, anyone can do it!
Clean your surface – Whatever substrate you are applying to; it must first be clear of all other stains, sealers, dirt or any foreign materials which may prevent the stain from penetrating the concrete surface.
“Profile” your surface – Since VIVID still needs a degree of penetration to create a chemical reaction, the surface must be able to have liquid penetrate into it! Otherwise, the stain will only sit on top of the concrete and never create the necessary chemical reactions. Profiling is typically done mechanically or with some form of a mild chemical; we suggest the use of SCR – Super Concrete Renovator to take care of both steps 1 and 2 in this application process.
Apply your concrete acid stain! This can be done in any number of ways, with any number of tools! For more control, we suggest using a fine brush or airless sprayer. However, for “messy” looks, this product can be only poured out onto your surface and spread around with something as simple as a paint roller or a towel!
Neutralize the surface with a pH neutralizer such as clear ammonia, baking soda, or T.S.P. then flush area with water and scrub with a stiff brush. Flush the surface again with water and remove waste with a shop-vac or mop.
Once VIVID reactive concrete acid stain is dry to the touch (none comes up when you swipe your finger across the surface of your floor or countertop), an appropriate sealer should be applied to preserve the integrity of your project. For exterior projects, we suggest using a clear acrylic sealer such as HS 200 or Super 20, and for interior projects we suggest the utilization of any number of Epoxies, Polyurethanes or Polyaspartics.