/Products/Sealers & Coatings/Polishing Chemicals
Polishing Chemicals
Showing 1 - 13 of 13
3D SPE E Protecter
Ameripolish® 3D SP E™ is a breathable semi-penetrating/semitopical sealer that helps to protect surfaces against stains and etching. 3D SP E™ creates a water-resistant barrier that prevents liquids from infiltrating the surface, protecting against staining and color dispersion. Since reformulating the original 3D SP formula, 3D SP E™ has better abrasion and chemical resistance, but maintains the same easy application methods you’ve become accustomed to using.

Product Data Sheet
Safety Data Sheet
Available Stock: 1
030273150
$347.69 / Ea
5 Gal. RTU 3D HS Densifier
Ameripolish® 3D HS (3 densifiers in one product) Hybrid Silicate Densifier improves surface performance and resists the harmful effects of traffic wear and weathering. By having 3 different size molecule silicates this product fully penetrates varying densities of concrete regardless of region or hardness. This improves the abrasion resistance for new or aged concrete. 3D HS is ideal for use for exposed and polished concrete, as well as cements with integral color.

Product Data Sheet
Safety Data Sheet
Available Stock: 6
030270500
$255.56 / Ea
DiamaGrout - Add Color
DiamaPro DiamaGrout is a high strength, rapid setting resinous concrete repair material. Its low viscosity formula enables it to be used to repair a multitude of concrete defects. Spalled concrete, cracked concrete, small surface spalling and pin holes prior to the polishing process can all be filled and repaired with DiamaPro Diama-Grout.

Coverage rate is approximately 1200-2000 sqft/ 2 gallon kit

Product Data Sheet
Safety Data Sheet Part A
Safety Data Sheet Part B
Available Stock: 4
030275200
$190.96 / Ea
DiamaGrout Color Pack Standard Gray
DiamaPro DiamaGrout is a high strength, rapid setting resinous concrete repair material. Its low viscosity formula enables it to be used to repair a multitude of concrete defects. Spalled concrete, cracked concrete, small surface spalling and pin holes prior to the polishing process can all be filled and repaired with DiamaPro Diama-Grout.

Coverage rate is approximately 1200-2000 sqft/ 2 gallon kit

Product Data Sheet
Safety Data Sheet Part A
Safety Data Sheet Part B
Available Stock: 6
030275300
$22.70 / Ea
Gal LD-1800
SureCrete’s LD1800™ concrete lithium densifier a liquid concrete hardener provides a clean, safe, economical “stand-alone” finished concrete floor. To harden concrete, this penetrating treatment reacts chemically with the free lime in concrete to produce calcium silicate hydrate within the concrete pores, making the concrete stronger and more durable. LD-1800 is a chemical concrete hardener.

Product Data Sheet
Safety Data Sheet
Available Stock: 11
030180100
$43.77 / Ea
Gal. Ameripolish EZ-Kut Grinding Agent
Ameripolish® EZ-Kut Grinding Agent is a water- based grinding agent, used for the initial cut on hard, dense concrete and helps with exposing large aggregate faster than dry or wet methods.
EZ-Kut also helps by dramatically increasing productivity of lower-grit diamond tooling. EZ-Kut Grinding Agent suspends concrete solids away from the surface for diamond tools to achieve maximum efficiency which reduces the project timeline, reduces labor costs, and extends the life of the diamond tooling. Can be used as part of a full flood wet process, or a mist as part of dry grinding.

Product Data Sheet
Safety Data Sheet
Available Stock: 6
030265001
$50.10 / Ea
Gal. RTU 3D HS Densifier
Ameripolish® 3D HS (3 densifiers in one product) Hybrid Silicate Densifier improves surface performance and resists the harmful effects of traffic wear and weathering. By having 3 different size molecule silicates this product fully penetrates varying densities of concrete regardless of region or hardness. This improves the abrasion resistance for new or aged concrete. 3D HS is ideal for use for exposed and polished concrete, as well as cements with integral color.

Product Data Sheet
Safety Data Sheet
Available Stock: 6
030269500
$74.09 / Ea
Gal. RTU 3D SP E Stain Protector Enhanced Formula
Ameripolish® 3D SP E™ is a breathable semi-penetrating/semitopical sealer that helps to protect surfaces against stains and etching. 3D SP E™ creates a water-resistant barrier that prevents liquids from infiltrating the surface, protecting against staining and color dispersion. Since reformulating the original 3D SP formula, 3D SP E™ has better abrasion and chemical resistance, but maintains the same easy application methods you’ve become accustomed to using.

Product Data Sheet
Safety Data Sheet
Available Stock: 7
030273100
$69.55 / Ea
Gal. RTU SR2 Stain Resistor
Ameripolish® SR² is a penetrating stain repellent specifically formulated to protect polished, dyed and non-dyed concrete from oil and water-based stains. The water and oil repelling qualities of SR² provide superior stain protection on most substrates.
SR² can be used as a standalone product, but to obtain optimum performance, Ameripolish® SR² is recommended for use with Ameripolish® 3D HS or HSL Densifiers.

Product Data Sheet
Safety Data Sheet
Available Stock: 8
030275100
$216.45 / Ea
LS densifier/hardner 1 gallon
LS is a premium concrete flooring sealer, hardener and densifier that improves performance, appearance and light reflectance of new or old concrete. Treated surfaces resist damage from water and surface abrasion, are easy to maintain and require no waxing. The increased surface hardness imparted by LS eliminates dusting and simplifies maintenance, producing a cleaner, healthier environment. Application is easy with one step, and involves no scrubbing, flushing or caustic wastewater.

Product Data Sheet
Safety Data Sheet
VOC Compliance

Available Stock: 5
030250100
$60.19 / Ea
LSGUARD (1 GALLON)
LSGuard is a glossy sealer and protective treatment for concrete flooring. It protects and enhances the color intensity of integrally colored and color stained concrete. LSGuard provides a long-lasting, high-gloss finish that maximizes light reflectance and eliminates the need for floor waxes, liquid polishes, and conventional resin-based coatings. Further improves the surface sheen and stain resistance of floors treated with Consolideck LS, LS/CS or Blended Densifier.

Product Data Sheet
Safety Data Sheet
VOC Compliance

Available Stock: 2
030260100
$108.19 / Ea
PG-7K-KIT
Ameripolish® PG-7K is a fast-setting, polymer-modified, high-strength cement with outstanding bonding properties formulated specifically to fill in small cracks, pinholes, and surface irregularities in concrete floors. It also increases durability, gloss and distinction of image (DOI) on most floors. PG-7K readily accepts Ameripolish® concrete dyes and requires no special polishing procedures. Ameripolish® PG-7K Part A – Powder must be used with PG-7K Part B – Liquid.

Product Data Sheet
Safety Data Sheet

How To Apply
030275160
Temporarily out of stock
$103.49 / Ea
Showing 1 - 13 of 13