E-CON is a concentrated, odorless, water-based polymer liquid that, when placed on fresh concrete, helps to control the rate of evaporation and extend workability.

Product Data Sheet
Safety Data Sheet
LEED Document
Available Stock: 2

DAY1® Finishing Aid is a colloidal silica based topical additive that makes concrete flatwork finishing easier and faster. It produces a better result and reduces the risk of a prematurely setting slab.

Tech Sheet
Product SDS
LEED Documentation
Available Stock: 16

Makes 25 Gallons

Brickform DAY1 is a colloidal silica-based finishing aid that makes concrete flatwork finishing easier and faster. It produces a better result and reduces the risk of a prematurely setting slab. Applied during floating and troweling, DAY1 finishing aid increases cream and extends workability under adverse conditions such as high wind, heat, or low humidity. It eliminates the need to add water to the surface which can lead to premature surface failure. DAY1 does not alter the water-to-cement ratio and becomes a permanent part of the slab so there is no membrane or residue to remove.

Product Data Sheet
Safety Data Sheet
LEED Documentation
Available Stock: 4

DAY1® Finishing Aid is a colloidal silica based topical additive that makes concrete flatwork finishing easier and faster. It produces a better result and reduces the risk of a prematurely setting slab.

Product Data Sheet
Safety Data Sheet
LEED Documentation
Available Stock: 12

Surface Deactivator creates a polymeric film that acts as a water retention barrier and temporary curing agent, protecting fresh concrete from light rain and reducing moisture loss.

Technical Data Sheet
Safety Data Sheet
Available Stock: 1

Select-Etch creates a polymeric film that acts as a water retention barrier and temporary curing agent, protecting fresh concrete from light rain and reducing moisture loss. Exposure Depth 3/8" - 1/2"
AGG. Exposure - 3/16"

Product Select Guide
Product Data Sheet
Available Stock: 4

Select-Etch creates a polymeric film that acts as a water retention barrier and temporary curing agent, protecting fresh concrete from light rain and reducing moisture loss. Exposure Depth - Sand Blast.
AGG. Exposure - Sand Blast.

Product Select Guide
Product Data Sheet
Available Stock: 2

Select-Etch creates a polymeric film that acts as a water retention barrier and temporary curing agent, protecting fresh concrete from light rain and reducing moisture loss. Exposure Depth 1/8" - 3/8"
AGG. Exposure - 3/32"

Product Select Guide
Product Data Sheet
Available Stock: 4

Select-Etch creates a polymeric film that acts as a water retention barrier and temporary curing agent, protecting fresh concrete from light rain and reducing moisture loss. Exposure Depth: 3/8" - 5/8"
AGG. Exposure: 3/16"

Product Select Guide
Product Data Sheet
Available Stock: 7

Surface Delay is a transparent blue, soapy odor, non-hazardous, concentrated, film-forming solution that is designed
to retard the initial evaporation of water from freshly placed
concrete or stamp overlay during finishing operations.

Product Data Sheet
Safety Data Sheet
Available Stock: 8

TK-TRI-FILM is an evaporation retardant for freshly placed
concrete to prevent premature drying that can result
in finishing problems such as stickiness, sponginess,
unevenness and cracking.

Product Tech Sheet
Safety Data Sheet
Available Stock: 8

TK-TRI-FILM is an evaporation retardant for freshly placed
concrete to prevent premature drying that can result
in finishing problems such as stickiness, sponginess,
unevenness and cracking.

Product Tech Sheet
Safety Data Sheet
Available Stock: 19

TK-TRI-FILM is an evaporation retardant for freshly placed
concrete to prevent premature drying that can result
in finishing problems such as stickiness, sponginess,
unevenness and cracking.

Product Tech Sheet
href="https://www.tkproducts.com/products/curing/Safety/tk2120.pdf" target="_blank">Safety Data Sheet
Available Stock: 10