PRODUCT DESCRIPTION
V-SEAL® 102 is a chemically reactive penetrating sealer that permanently fuses with porous broom finish concrete porous concrete block (CMU). V-SEAL® 102 is formulated to combat the effects of freeze/thaw, reduce penetration of stains and damaging impurities such as dirt, oil and salt, reduce dusting, retard mold and mildew, and limit hydrostatic moisture and efflorescence. V-SEAL® 102 can be applied to new concrete as soon as the finished surface can withstand the weight of a worker without marring, and at any time thereafter. V-SEAL® 102 is breathable, with virtually no impact on surface traction, is compatible with join fillers and crack fillers, and is an ideal primer to protect the appearance and lifespan of topical coatings, glue, tape and other floor treatments. V-SEAL® 102 creates a cross-linked insoluble internal membrane barrier that will wear away only if the substrate itself wears away below sealer penetration.
RECOMMENDED USES
Protecting residential and commercial structures, interior and exterior, such as machine trowel concrete floors, brick walls and chimneys, mortar, grout, stucco, pavers, block, natural stone, artificial stone, roads, driveways, parking decks, sidewalks, patios, and basements. Architectural features such as countertops, mantels, furniture, ponds, fountains, and statues. V-SEAL® 102 is suitable for horizontal and vertical, above and below grade applications and is an effective moisture reducing primer for topical coatings, glue, tape and floor treatments. Subject to user verification prior to application, V-SEAL® 102 may also be used to seal and protect other porous substrates such as wood, terra cotta, clay, dry wall, and more.
COVERAGE RATE*
100-200 sq. ft. per gallon broom finish/rough
200-400 sq. ft. per gallon machine trowel/dense
*Coverage rate is for estimating purposes only. Application rate is based upon porosity and absorption. Always test absorption prior to application. When properly applied product should create a wet surface sheen and absorb within 1 minute without puddles. Immediately disperse puddles. Excessive application may result in white residue which will not affect sealer performance and generally dissipates over time, but may removed immediately with abrasion.
DRYING TIME**
Dry to touch 1-3 hours, traffic 6-12 hours. Inclement weather should be avoided for at least 12 hours.
**Drying time is for estimating purposes only.