SureCrete's SureSpray™ is a cement-based sprayable concrete overlay for both interior and exterior concrete surfaces. Perhaps no other bag mix lends itself to such an enormous array of applications, variations, and alternatives: from the simplest of orange-peel to the elegant Euro-texture. Sure Spray was designed to be applied by compressed air spray equipment (commonly a hopper gun), but may also be troweled or squeegeed. Restoration, repair, resurfacing, architectural accenting, surface protection, and creating slip resistance of existing concrete are all realized through a spray concrete overlay. Unique polymers form adhesion and flexibility essential in a thin overlay. SureSpray™ is seasonally user-friendly, available in Standard SureSpray™ and SureSpray ST™ with retarder used in warmer weather conditions for longer work time.
Sure Spray's spray concrete overlay versatility is one of it's strongest qualities and allows it to be applied in a variety of fashions to create a wide array of designs and techniques. Able to be applied with a trowel, squeegee or sprayer, the possible textures are nearly limitless. Highly skilled applicators will be able to carry one product in their inventory to perform many different looks and texture designs for their customers. Our Overlay will help your company to stay more "mobile" and be able to get on and off of job sites faster without having to make those pesky runs to the local supply store. As a homeowner, Sure Spray™ can be easily manipulated to create beautiful one-off textured surfaces to suit any interior or exterior arrangement.
SureSpray's sprayable concrete overlay versatility lends itself to a wide array of applications:
Residential Sidewalks
Home Driveways
Commercial Floor Coatings
Property Management Walkways
Pool Decks & Patios
Retail Flooring Locations
"Slop Trowel" Texture Designs
"Wet Bubble" Textures
Multi-Color "Bubble" Designs
Faux Tile Designs
Custom Stencil Patterns
How Do You Apply SureCrete's SureSpray Sprayable Concrete Overlay?
SureSpray has a broad range of application methods, here is the most common:
Any surface receiving a cement-based coating must be clean, cured, sound and profiled. See our Surface Preparation products for more information on accomplishing this
Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and there will be no precipitation in the applied areas for a 48 hour period following application.
Add 4 - 6 quarts water per 50 lb bag to 5 gal bucket and mix in the color desired for integral coloring of spray-able concrete.
Slowly introduce SureSpray sprayable concrete overlay while continuously mixing and mix for a minimum of 1 minute once all the product is in a container. Scrape the sides of the bucket to make sure there are no "dry pockets" that didn't get mixed properly.
Mist the surface of the concrete with water ahead of any areas about to receive spray-able concrete.
Using a hopper gun at a 1/4" setting, apply SureSpray evenly to surface area with 100% coverage.
If you need a second coat of SureSpray spray-able concrete overlay, only wait until the surface is properly cured - approx 2-6 hours. A second layer can be applied same as the first coat. Make sure to scrape away excess material from first coat before applying the finish.
Once the surface has dried and cured sufficiently (approx 2-6 hours), it can accept stains and secondary colorants and is also ready to receive a sealer. Typical outdoor applications would utilize an acrylic sealer from our SureSeal line of products.