SureBroom™ is the premier high-strength thin broom concrete overlay for extremely used trafficked areas. Its formulation is designed to transform old, spalling, broken concrete to a freshly broom surface. Typical areas requiring SureBroom concrete overlay include high rise parking decks, driveways, sidewalks, parking lots, and retail storefronts. Although designed to be broomed, it may also emulate the many designer looks of other thin overlays. SureBroom™ may be applied with a concrete broom or by a combination of compressed air spray equipment and trowel and or squeegeed. Restoration, repair, resurfacing, architectural accenting, surface protection, and creating slip resistance of existing concrete are all realized through SureBroom™. It is prepared with white cement to accept Color Packs. SureBroom™ decorative overlay is the perfect product for restoring a "fresh" broomed concrete look to cracked or otherwise old slabs and substrates. Being able to simply resurface an old and worn concrete slab can make for a huge cost saving in lieu of completely removing the old concrete surface and pouring a completely new slab. This broom concrete overlay can be applied over very large surface areas including driveway concrete and concrete sidewalks resurfacing with ease utilizing a relatively small crew. It is also simple enough that a homeowner can apply it on his own concrete home driveway or sidewalk to give a view of a brand new surface.
Concrete broom overlay has a wide variety of application surfaces:
Residential Sidewalks
Home Driveways
Commercial Floor Coatings
Property Management Walkways
Concrete Resurface
Concrete Walkway Restoration
Coat Decorative Concrete
Solid Color Floors
Blank Canvas for Eco-Stain
Apartment Complex Stair Treads & Risers
Sidewalk Overlay Resurfacer
Resurface Concrete Driveway
Driveway Concrete Overlays
How Do You Apply SureBroom Concrete Resurface Overlay Mix?
SureBroom can easily transform a surface in need of restoration:
Any surface receiving a cement-based coating must be clean, cured, sound and profiled. See our Surface Preparation products for more information on accomplishing this
Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and there will be no precipitation in the applied areas for a 48 hour period following application.
Add 4 - 6-1/2 quarts water per 50 lb bag to 5 gal bucket and mix in any color desired for the integral coloring of SureBroom concrete broom overlay.
Slowly introduce SureBroom while continuously mixing and mix for a minimum of 1 minute once all product has been emptied into the container. Scrape the sides of the bucket to make sure there are no "dry pockets" that didn't get mixed properly.
Mist the surface of the concrete with water ahead of any areas about to receive SureBroom.
SureBroom concrete overlay can be applied by trowel, squeegee or broom depending upon desired texture.
If you need a second coat of SureBroom concrete overlay, simply wait until the surface is properly cured - approx 2-6 hours. A second coat can be applied same as the first coat. Make sure to scrape away excess material from first coat before applying the finish.
Once the concrete broom overlay surface has dried and cured sufficiently (approx 2-6 hours), it can accept stains and secondary colorants, and is also ready to receive a sealer. Typical outdoor applications would utilize a acrylic sealer from our line of products.