SC Polymer is concentrated and is not designed to be used without diluting. Below you will find the following dilution rates that can be used. The formula of dilution should be equal parts of clean potable water to SC Polymer (Example 2:1 equals 2-parts water to 1-part SC Polymer)
Sure Prime 1:1 27.5% Solids
Eco Prime 4:1 11% Solids
Dual Component 2:1 18% Solids
Overlays 3:1 13.8% Solids
1. Using a clean mixing container, pour in the appropriate equal part of SC Polymer.
2. Add the equal parts of the clean potable water to the SC Polymer.
3. Mechanically mix with a cordless drill equipped with a “Jiffy-style” mixing blade on low to medium speed for 2-minutes.
4. For application techniques see the full instructions on the TDS.
Liquid Concrete Polymer Concentrate Can Be Used For:
Improved Adhesion
Reduced Permeability
Increased Abrasion Resistance
Assists the Curing Process
Improved Flexural Strength
Improved Tensile Strength
Enhanced Freeze/Thaw Durability
Concrete Polymer Concentrate will enhance the properties of any concrete and is typically used for patching materials, bridge decks, grouts, stucco, decorative thin cement-based overlays.
Some surfaces that might need to be prepped with Liquid Concrete Polymer:
old concrete slabs
bridging floors and gaps
worn-down surfaces
overly porous concrete
over or tightly troweled surfaces
freeze/thaw cycle affected environments
interior residential floors
interior commercial flooring