Liquid Release forms a barrier that prevents imprinting tools from sticking to the concrete surface during the stamping process. It is commonly used on interior applications in place of powdered release or where final projects require topical stains or coatings.
150 to 250 sq ft per gal.
Clear liquid with little/no residue
Easy-to-apply
Apply with a sprayer
Solvent-based
Interior or exterior applications
Minimizes wear on tools
USES • BRICKFORM Liquid Release is used in the texturing process of both colored and uncolored concrete. It is also used as an alternative to powdered release agents that may not be desired in certain circumstances, such as interior projects. BRICKFORM Liquid Release should be considered for use on projects that are to be textured but colored later, with BRICKFORM Cem-Coat™ or Blush-Tone Acid Stain™, after the concrete has cured.
LIMITATIONS • BRICKFORM Liquid Release can only be used on the immediate area to be imprinted. If used on an extensive area at one time, it will evaporate before the concrete can realistically be textured. NEVER trowel or mix BRICKFORM Liquid Release into the plastic, concrete surface.