SureCrete's XS-327 concrete countertop sealer protection is a specially formulated two component water-based, moisture-cure, high solids hybrid polyurethane coating designed for application over completed concrete countertops and surfaces. XS-327 is a penetrating food safe, UV stable, minimal color enhancing sealer, available in both matte and gloss finishes. At 64% solids (varies upon reduction rate) and 25 g/L VOC this high-performance clear top coat generates the premier balance of strength, flexibility, chemical and scratch resistance. XS-327 concrete countertop sealer is ideally suited for both commercial and residential settings applied upon concrete countertops, fireplace surrounds, shower panels, floor tiles, wall panels, and all Xtreme Series products. Like some other sealers, XS-327 countertop protection becomes food safe upon curing. It is stain resistant to most household chemicals and culinary items and is heat resistant to 300°F (149°C). XS-327 is distinctive in its ability to be touched up or repaired.
With such a low VOC rating at only 25 g/L, XS-327 is an incredible eco-friendly sealer concrete countertops, after curing, the sealers staining is completely food safe, making it an ideal sealer for use in both residential and commercial kitchens. Also, being a water-based sealer, XS-327 cement countertop coating puts out little to no odor, making it an ideal layer for use in residential applications. XS-327's scratch and abrasion resistance are also second to none, making it viable for a variety of surfaces. XS-327 is simply the best countertop sealer on the market today.
Food Safe Concrete Countertop Sealer Typical applications:
Concrete Kitchen Countertops
Dining & Coffee Tables
Outdoor Counters
Shower Panels
Lightweight Wall Panels
Precast Decorative Pieces
Concrete Countertop
Protect Surface Scratching
Finishes Wood will not Penetrate
Concrete Countertops Seal Food Out
Building Facades
Custom Floor Tiles
Custom Furniture
Bath Vanities
Integrated Kitchen Sinks
Integrated Bath Sink
Wood Looking Counters
Safe Finish Repels Oils
Finishes Food Safe Cement
Seal Countertops Matte or Gloss
How to Apply SureCrete XS-327 urethane water-based Countertop Protection?
Following these instructions, anyone can apply XS-327 concrete sealing countertops:
Any surface that is about to be sealed needs to be completely cured, clean and free of all contaminants, and fully profiled and etched.
Mix 2 parts B and 3 parts A continuously for 3 minutes to ensure complete catalyzation.
For the prime coat, add 7 parts water to 1 part catalyzed product and mechanically mix for 2 minutes.
Flood surface with xs-327 concrete countertop sealer and work into the surface using a high-density foam roller until the surface is saturated.
Backroll the surface with a relatively dry roller using only the weight of the roller.
Once the prime coat is dry to the touch, the surface is ready for the first coat.
After mixing another batch to full catalyzation, dilute catalyzed product at a rate of 2 parts water to 1 part sealer.
Apply XS-327 again in similar fashion as a prime coat, this time with only an even coating, again back rolling to prevent roller marks.
Once the first coat is dry to the touch, the surface is ready for the second and final coat of sealer.
Mix one more batch of XS-327 cement countertop sealer, then dilute catalyzed product at a rate of 2 parts water to 1 part sealer.
Apply countertop sealer in similar fashion to first coat with an even coating and again back rolling to prevent roller marks.
24 hours after second coat of XS-327 countertop sealer is applied, the surface is ready for light use, and is fully cured and finishes safe for food after 7 days.