Surface Preparation Guidelines:
Surface preparation is extremely important for all Hybrid XT system applications. It is highly recommended to prepare the substrate using a diamond grinder to mechanically grind the surface and remove all existing coatings, grease, oil, or other surface contaminants and debris. Vacuum surface to leave the surface free from loose debris. You may use a degreaser on oil or grease saturated spots before grinding if necessary. The floor must be dry prior to coating.
Advantages:
Comes Clear and uses xtreme engineered colorant as other versatile resins
Will not yellow – even outside
Fast setting – can be installed in 1 day
Same resin for 6 systems
Same resin for ALL coats
No VOCs
Can be installed down to 0°F
Industrial Strength
1:1 Mix Ratio
Industrial strength
Comes clear
Has a smooth, shiny, and reflective surface
Extremely durable to abrasion and many chemicals
Texture can be added
Meets requirements for USDA and FDA use for incidental food contact
Refer to Product Data Sheet for complete instructions.