SureCrete's water based colored floor polyurethane coating is a 2 component 57% solids, acrylic polyurethane designed as a non-yellowing thin mil color coating for concrete, cement-based overlays, or as a top finish coat on epoxy systems. The high performance pigmented top coat provides the durability in high traffic areas as solvent base system with the ease and safety of a low VOC (73 g/L) water base system. Unlike nearly all polyurethanes, Dura-Kote Colored Polyurethane WB has remarkable properties related to vapor permeability that permit its use in an exterior setting. Generating the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance, it is both user-friendly and extremely durable.
Finding an eco-friendly concrete sealer that is also extremely durable can be quite difficult, much less a colored version of that product. Typically, a pigmented, environmentally friendly interior floor coating can only be accomplished using a colored 100% solids or water-based epoxy in conjunction with a clear water-based polyurethane protective top coating. SureCrete has simplified this system, enabling applicators to get a beautiful, durable, eco-friendly water-based concrete floor coating with just one product - Dura-Kote Colored Polyurethane Water Based. Readily available in a wide array of colors at local distribution centers throughout the country, this colored polyurethane water-based will help you to quickly and beautifully finish your DIY home renovation or commercial project.
Industrial Strength Water Based Colored Floor Polyurethane Typical Applications:
Eco-Friendly Colored Commercial Floors
Green Retail Flooring Projects
Low Odor Paint Coatings for Restaurants and Bars
Eco-Friendly Painted Residential Living Areas
School Hallways and Bathrooms
Interior Hotel and Resort Flooring
Government Walkways with Heavy Traffic
Low Odor Auditorium and Stage Floors
Aircraft Hanger
University Walkways
How to Apply SureCrete's Water Based Colored Floor Polyurethane:
Any surface that is about to be sealed needs to be completely cured, clean and free of all contaminants and fully profiled and etched.
Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and relative humidity to stay below 75%.
Mechanically mix the water-based tinted part A portion for at least 1 minute before adding in part B. Now pour 1 part B into three parts An into large mixing container (we pre-measured the kits to make it easy on you!) mix mechanically for a minimum of 3 minutes.
Use a premium, de-fuzzed, phenolic core roller to roll out thin coats over the workable area, making sure to maintain wet edges and back roll the entire surface.
Two coats are typically suggested with any interior project receiving a polyurethane paint coating, with the second layer being applied as soon as the first coat can be walked on, and is used in the same manner as the first coat.
While not necessarily required, we suggest the use of a sacrificial wax coating to extend the life of the floor and add a measure of slip resistance.
Questions Asked About Dura-Kote Water Based Colored Polyurethane Floor Paint:
Can I use just one coat of Dura-Kote Colored Polyurethane Floor Paint?
Technically yes, however, it is not suggested. For the best results, we highly recommend using two thinly applied coats. That being said, Dura-Kote Colored Polyurethane products have been known to function better than comparable sealers in situations where a single-coat interior floor sealer is required. If you are happy with the color achieved through the first coat of water-based colored polyurethane, then the second coat may be substituted with a thin clear coat instead.
Will Dura-Kote Colored Polyurethane WB self-level and fill small holes?
To a very slight degree, yes. It is a higher solids content coating than an acrylic sealer, but it does not have a high enough solids content and flowability to fill large voids.
Can Dura-Kote Colored Polyurethane WB be used outside?
No, polyurethane paint coatings are not breathable in nature and therefore should not be used in exterior applications.
I have strict VOC laws in my area, can I use Dura-Kote Colored Polyurethane Paint WB?
Check with your local municipalities to be certain, but given its extremely low VOC rating at less than 75 grams per Liter, this product can be used in almost all states or municipalities.