With SureCrete's thin concrete repair patching product, FlashPatch, repairing and fixing your partially broken concrete slab may not be the most glorious part of creating a beautiful new cement surface. FlashPatch™ it is certainly one of the most important steps in a successful decorative or restorative concrete project. This product can help to ensure that whatever coating or overlay on top of your repaired slab will stay strong and continue to look fantastic for years to come.
While most cement patching products requiring bonding agents and need to be left overnight to cure before coating or overlay can be applied. SureCrete's Flash Patch bag mix can be implemented to receive a finish coat in a little as 1 hour, unlike quikrete. Shortening this process can help whether you're just a weekend warrior trying to get your cracked concrete done quickly, or you're a professional artisan contractor on a commercial project seeking to make sure your clients can utilize their new flooring systems as soon as possible. Flash Patch™ is as easy as mix concrete in a bucket.
Deep Level Thick Concrete Repair Product - Typical applications:
Spalled Interior Floors
Cracked and Broken Slabs
Older Interior Concrete Floors
Residential Living Area Substrates
Repair Concrete Walkways and Entryways
Patching Cracked Parking Garages
Concrete Driveway Repair
Thin Concrete Repair
Surface Concrete Patching
Patio Floors
Pool Decks
Driveway Concrete Cracks
Repairs Crack Sidewalks
Commercial Floors
Concrete Crack Repair
Concrete Repair Product
Repairs Cracked Concrete
Why Use SureCrete's Thin Concrete Repair and Patch Product FlashPatch™
• Stronger Bond Strength then liquid polymer products
• High Compressive Strength
• Fast Setup and Cure Times
• Tintable via SC TruColor™
How Do You Apply SureCrete Quick Concrete Patching Material?
We tried to make it as straightforward and efficient as possible when utilizing our concrete repair mix and overlay materials, and repair is certainly no different.
Cleaning is always your priority in any concrete project. Make sure the surface is clear of all chemical contaminants, grease, oil, old paint and other foreign matter.
It may not always be needed, but your surface may require some profiling to ensure the most secure bond of Flash Patch to your substrate.
Dampen the area slightly without creating any puddles or pooling areas.
NOTE: Before applying Flash Patch™, the surface should be saturated surface dry (SSD) or damp with no puddles.
Mix only enough product for your current project in a bucket, making sure it has a smooth consistency.
Trowel by hand or squeegee product tightly into patched area, as quickly as is reasonable. Minimize troweling, do not over work surface.
Allow product to dry sufficiently before placement of any overlay, usually 1-2 hours (depending on surface porosity, temperature, and the amount of material used).
Before applying an overlay, be certain that the patched surface is no longer generating excessive heat from its curing. If using a coating or sealer, wait 24 hours.