DESCRIPTION AND BASIC USE: : Proline DURA-LIQUID RELEASE AGENT is for use when stamping freshly poured colored or uncolored concrete or imprint able cementitious toppings. It promotes easy release of stamping and texturing tools and improves results by preventing sticking of wet concrete when the tools are removed from surfaces. The release agent forms a bond-breaking barrier that helps prevent the tools from sticking and marring the pattern in the fragile surface of the fresh concrete or cementitious topping. Proline DURA-LIQUID RELEASE AGENT may be applied on the face of mat-type texturing tools or embossing skins and to the surface of freshly placed concrete flatwork before imprinting. It is suitable for use on surfaces which have been colored with Proline DURA COLOR HARDENER. The pleasant, bubblegum-type scent helps to identify the product. LIMITATIONS: Proline DURA-LIQUID RELEASE AGENT has a flash point of 176° F (80° C). As it is combustible, it should not be used in areas where open flames, ignition sources such as water heaters or furnaces, or welding tools are present. All tools must be thoroughly cleaned of all residue or other liquid releases and be allowed to dry completely prior to use with Proline DURA-LIQUID RELEASE AGENT. STORAGE: Store indoors or in the shade away from direct sunlight and with a tightly closed lid. When stored indoors in the original unopened container and protected from extreme heat, the shelf life of DURA-LIQUID RELEASE AGENT is at least 1 year from the date of purchase. COVERAGE: Apply full strength. Coverage will vary depending on timing, method of finishing prior to imprinting, application techniques, effect desired, tools used, and jobsite or other conditions. For spraying the tools, the coverage rate is approximately 400 square feet per gallon. For spraying the concrete surface the coverage rate is approximately 200 square feet per gallon. PREPARATION: Surrounding areas and adjacent surface should be protected, work areas roped off and appropriate sections closed to traffic. For exterior hardscapes, landscaping should be protected, parked vehicles removed, and doors and windows closed in nearby buildings. Weather conditions should be considered when planning outdoor installations. Windy conditions will severely affect the application rate of the liquid release. APPLICATION: USE IN WELL VENTILATED AREA. Immediately prior to imprinting, the Proline DURA-LIQUID RELEASE AGENT should be sprayed in a fine misting spray evenly across the surface of the clean imprinting tool and the concrete or topping surface. Sufficient material should be applied so that a uniform but fairly light coverage is attained. Proline DURA-LIQUID RELEASE AGENT evaporates and it must be reapplied periodically. The required timing of the reapplication is influenced by temperature, humidity, air movement and sun exposure, and will vary from job to job. Whenever the tools show indication of sticking to the concrete, the liquid release should be reapplied. Remove DURA-LIQUID RELEASE AGENT from tools and concrete surfaces with DURA-CLEAN.